Showing posts with label Knitting. Show all posts
Showing posts with label Knitting. Show all posts

Thursday, 13 February 2014

Too Tall for Clothes, Alterations #1 and #2

Too Tall Alteration #1. Add Something Around the Bottom (of a Skirt or Dress!)

I recently purchased a black jersey dress in the sales. It is flattering and comfortable, and very cheap, but unfortunately made for someone much shorter than me! Though in my younger days I used to be able to get away with micro-mini skirts, I think I had better leave that to my teenage daughters these days!
For Christmas I received a knitting book called 'Knitting Over The Edge' by Nicky Epstein. This covers the many possibilities for cuffs, collars, button bands and edgings, but it does expect you to knit the rest of the jumper as well!
Not wanting to do that much knitting, my cunning plan was to lengthen the dress by knitting my own lace edging.
Obviously there are many ways of adding something to the bottom of skirts and dresses, but it needs to look like it was intended, rather than added after. Being black it was easy to match the colour. I chose merino four ply from Debbie Bliss. Using the pattern for "Angel Lace" from page 90, I knitted two shore pieces for the sleeves, and one long one for the hem.
 Finished Dress

Detail of lace around the hem
Lacy pieces, being blocked.

A pleasing result, though it required quite a lot of skill to get the lace sewn on without 'growing' the jersey of the dress too much. (large  zig-zags required!)
This is definitely a technique that I will return to in the future. I can't wait to knit some lace in an outrageous colour to compliment some future summery outfit.

Too Tall Alteration #2

You know when you buy some tights, but despite being the biggest size, they still do not reach all of the way up your legs? (or if you shrink your favourite pair?)
My best tip for this situation: Cut the toes off!
I have done this many times. The first time I zig-zagged the raw edge of the tights, but I soon realized that this is not necessary because the knit is too fine to ladder. on thick tights, I have not tried fine ones, as I don't tend to wear them.
I was even brave enough to snip off the toes of my favourite Falke tights,. They are fine, much more comfortable, and they have not laddered. Hooray!

Be brave, give them the chop!

Too Tall Alteration #2a The Big Chop! 

Another misguided sales acquisition of mine was a jersey velvet dress. In this case I just chopped below the bra-line, to make a skirt. I made a small casing around the top for elastic, all done! Though I'm not sure what I'm going to do with the remaining top part?
The middle section between the bra line and the waistline added extra much needed length to the skirt. Its great for skating!
Nice Skirt, Shame About the Top!

Happy chopping, and please send me any tall alterations queries if you have them!
I'm sure I would have encountered nearly all variations of these problems!




Friday, 10 January 2014

Knitting Break: What to do With that Yarn you Brought in the Sale!

Knitting Break: What to do With that Yarn you Brought in the Sale!



Version 1 with a Top Notch Fringe!

It is at this time of year that you just need to settle down in front of a log fire, and an old movie, and knit something. Handily the local knitting shop is full up with wooly bargains. I couldn't help but buy two 100g hanks of Noro 'Kogarashi' the beautiful japanese yarn that is half silk, half wool (and a little bit of straw!). I bought this yarn because the colour varies throughout the hank in shades of pink green and white. 
The idea was to knit a scarf where the rows are slanted, this effect being exaggerated by the colour variation. Then to use my new  fringe twister, to make a top notch fringe !

Version 1. 

(Please buy your own yarn in the sales, and vary the number of stitches to produce a 12-13 cm wide scarf to your own liking!)
Note: I almost always use a shortish circular needle, the lack of long needle ends makes the frequent turns much quicker.

For Noro 'Kogarashi' Yarn Using a 6.5 mm circular needle

First wind off enough yarn to make the fringes, and keep safe.

Increase section
Make a slip stitch, knit into it, Turn
(RS) Knit into front, back, front, of the stitch. (3 from 1),Turn, 
(WS) Knit to end, turn (3 stitches).  
(RS) M1 (by knitting into the front and back of the stitch) K1, M1, turn  (5 stitches)
(WS) Knit to end, turn
(RS) M1, K3, M1 (7 stitches)
(WS) Knit to end, turn
Continue increasing it this way until you have 27 stitches, ending in a WS row. Note the 27 stitches are across the diagonal, the scarf finished width can be measured along the straight edge.

Main section
Next row:
(RS)Slip one, knit one, pass slipped stitch over, (we will call this D1), Knit to last stitch, M1, turn
(WS) Knit to end, turn
Repeat these two rows until you have nearly finished the hank of yarn, or the scarf is the desired length.

Decrease section
Next row:
(RS) D1 knit to last two stitches K2tog, turn (25 stitches)
(WS) Knit to end, turn
Repeat these two rows until 3 stitches remain, ending with a WS row.
(RS) Slip 2, K1, Pass slipped stitches over. (1 stitch)
Cut yarn, and pass through the loop. Pull tight.

Weave in the ends, and add fringes!

This of course was not enough, as I then thought: What if I made sections of alternating slant directions?

Version 2

Save some yarn for the fringe.
Work the increase section as before, ending with a (WS) row. (27 stitches)

Diagonal Decrease Section
(RS) D1,  K24, turn.     Leave 1 stitch on the LH needle.(26 stitches)
(WS) K25, turn.
(RS) D1, K22, turn.     Leave 2 stitches on the LH needle. (25 stitches)
(WS) K23, turn.
Continue in this way until there are 14 stitches remaining.
(If you have a different number of stitches to start with, the number remaining at this stage will be (TOTAL-1)/2+1  )

Diagonal Increase Section
(RS) M1, K1 turn, (12 stitches left on the LH needle)
(WS) K3, turn.
(RS) M1, K3, turn, (11 stitches left on the LH needle)
(WS) K5, turn.
Continue in this way until you have incorporated all of the stitches on the LH needle and you have 27 stitches again.
Do not do a WS row.
Turn. This is now the RS.

Now work the Diagonal decrease section.

Version 2

Repeat these two sections until the scarf is of the desired length, or you are nearly out of yarn.
Work the decrease section.
Work in the ends, and add the fringes.

Fringe Twister in Action!
The finished scarf is soft, but thick, with a lovely texture, and feels quite japanese with this simple geometric design.

Happy Knitting!

(If you spot a mistake in the pattern, or cannot understand what I mean, please drop me a line and I will elaborate!)


Here's the finished versions side by side. I love the way that the colours softly fade into each other.